Surfaces in perfection
Where champions unleash their full potential
We at Weitzer Parkett are surface perfectionists. Especially in the sports sector the surface of the floor is particularly important. Weitzer Sport stands for absolute performance. With its ProStrong Sport surface it withstands even the strongest sporting stresses.
Sport parquet
Experience top sporting performance with sport parquet from Weitzer Parkett®.
- Ideal „Grip & Slide“ properties
- Particularly well suited for heavy duty use
- Remarkable wear resistance
the satin gloss surface with a special lacquer
- The special varnish provides long-lasting surface protection and ideal grip
- Consists of several coordinated layers
- Particularly well suited for heavy-duty use: scratch-resistant, chemical-resistant and dirt-repellent.
- Particularly environment-friendly
- Corresponds to stress class C according to ÖNORM C 2354 – the highest of three possible classes.
- Weitzer Sport meets all requirements according to EN 14 904, as well as DIN V18032-2 and FIBA guideline
Weitzer Sport is available
in eight different variants.
A sports floor must fulfil a multitude
of demanding criteria:
Our outstanding Weitzer sports floor has excellent cushioning properties, which minimise the strain on the musculoskeletal system. This not only helps prevent injuries, but also reduces the occurrence of fatigue. In addition, fast games benefit from the impressive ball reflection of Weitzer Sport.
- Thanks to the multi-layered construction, Weitzer Sport is dimensionally way more stable than solid parquet.
- The actual wear layer of a sports floor is the UV sealing. It provides the ideal grip and is more abrasion resistant than any other sealant applied on site. Re-sealing is only necessary after more than 10 years of intensive use.
Shock absorption or force reduction is the ability of a sports floor to absorb the shock of an impact. The athlete must not be exposed to more than 47% of the impact when compared to a non-resilient floor.
Standard deformation or resilience defines the vertical deflection of the sports floor under load. The minimum deflection required is 2,3 mm.
Deformation control is a floor’s ability to control the area spread of a deformation. It is measured in a distance of 500 mm from the point of vertical impact (by a falling weight of 20 kg). The maximum deformation must not be higher than 15%.
Ball rebound defines the height in % terms a basketball bounces on an area-elastic sports floor, when compared to the ball rebound on a non-resilient floor. The ball rebound must be at least 90%.
The friction test determines the properties of a sports floor surface with regards to quick turns by the athlete and the prevention of uncontrolled sliding. The sliding distance required is 0,4 to 0,6 m.
This test shows the ability of an area-elastic sports floor to withstand loads from seating areas/bleachers, portable basketball goals or transport carts for aerobic mats. Minimum requirement: the sports flooring should
withstand a load per axle of 1500 N without damage.
